MPVClub.com home Log in to check your private messages Support MPVClub.com!


Driver door panel removal for window troubleshoot
Post new topic   Reply to topic    MPVClub.com Forum Index -> 00-06 MPV Problems
View previous topic :: View next topic  
Author Message
Budman
Newbie
Newbie


Joined: 20 Jul 2013
Posts: 1

PostPosted: Sat Jul 20, 2013 2:26 pm    Post subject: Driver door panel removal for window troubleshoot Reply with quote

2004 MPV LX. I only see 2 screws holding the panel on. Power window sticking with clicking noise. Got it closed with hand assist.
Back to top
View user's profile Send private message
Monsterbishi
Jr. Member
Jr. Member


Joined: 04 Jul 2011
Posts: 96

PostPosted: Sat Jul 20, 2013 3:08 pm    Post subject: Re: Driver door panel removal for window troubleshoot Reply with quote

There is a screw behind the courtesy light, one behind the door handle and another under a plastic cap in the arm rest well.

Also two plastic pins on the outter edge of the door trim, the rest are just pop-pins.

-✂- Cut Here -✂-
ǝɯǝpɐɹʇ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ɐɥʇ sı sıɥʇ
Back to top
View user's profile Send private message
scross
MPVClub Addict
MPVClub Addict


Joined: 07 Nov 2005
Posts: 2661

PostPosted: Sat Jul 20, 2013 3:37 pm    Post subject: Re: Driver door panel removal for window troubleshoot Reply with quote

IIRC, almost every screw you remove here is different (size, shape, etc), so keep good track of which screw goes where for ease of reassembly. The instructions at step 10 say to use a fastener remover (they're cheap and available at any auto parts store), but I don't recall having to use anything other than maybe a flat-head screwdriver to pop these out, if even that.

FRONT DOOR TRIM REMOVAL/INSTALLATION

1. Disconnect the negative battery cable if equipped with power window system.
2. Remove the inner garnish.
3. Remove the regulator handle if equipped.
4. Remove the fasteners.
5. Remove the cover.
6. Remove screw A.
7. Remove screw B.
8. Remove the lens.
9. Remove screw C.
10. Disengage clips D from the body using a fastener remover.
11. Pull the front door trim upward, then disengage hooks E from the body.
12. Extract the inner handle from the front door trim.
13. Disconnect the door lock switch connector and the power window main switch connector if equipped. (driver's side)
14. Disconnect the power window subswitch connector if equipped. (passenger's side)
15. Remove the courtesy light.
16. Remove the front door trim.
17. Install in the reverse order of removal.





XME7744W002.png

XME7744W002.png - File downloaded or viewed 1205 time(s)

Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    MPVClub.com Forum Index -> 00-06 MPV Problems All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group