MPVClub.com home Log in to check your private messages Support MPVClub.com!


And this casting is what?
Post new topic   Reply to topic    MPVClub.com Forum Index -> 89-98 MPV
View previous topic :: View next topic  
Author Message
catimann
Newbie
Newbie


Joined: 16 Jun 2018
Posts: 6

PostPosted: Sat Nov 26, 2022 1:44 am    Post subject: And this casting is what? Reply with quote

95 V6 model, on the Pass side cyl bank at the back of the head (closest to the fire wall) is this casting with a hose that runs center and up to the intake manifold. I assume it has something to do with emissions like PCV but in my factory manual (I find that thing more and more useless) it has no mention or drawing of it. It is attached to the head by one bolt.
Sorry I can just not figure out how to upload a picture.





Screen Shot 2022-11-25 at 10.43.02 PM.png

Screen Shot 2022-11-25 at 10.43.02 PM.png - File downloaded or viewed 37 time(s)


Screen Shot 2022-11-25 at 10.45.55 PM.png

Screen Shot 2022-11-25 at 10.45.55 PM.png - File downloaded or viewed 45 time(s)

h
Screen Shot 2022-11-25 at 6.03.52 PM.png

Screen Shot 2022-11-25 at 6.03.52 PM.png - File downloaded or viewed 45 time(s)

Back to top
View user's profile Send private message
chaseNYC
MPVClub Addict
New '98 and feelin' great
MPVClub Addict


Joined: 21 Jul 2003
Posts: 1804
Location: Brooklyn, NY, USA, Planet Earth

PostPosted: Fri Dec 16, 2022 9:33 am    Post subject: Re: And this casting is what? Reply with quote

Hey there,

Yea its the PCV valve. Common place for an oil leak. Swap out the PCV and o-ring and you're good to go.

Green Machine (Green '97 ES) - 90K!
JDM chrome power-folding side mirrors with heated mirror retrofit/JDM chrome grill/JDM rear spoiler/Android 6.2" D-Din Navi/Four 7" Farenheit monitors/heated seat kit retrofits,1st and 2nd row/Crimestopper remote start

Back to top
View user's profile Send private message
catimann
Newbie
Newbie


Joined: 16 Jun 2018
Posts: 6

PostPosted: Fri Dec 16, 2022 9:56 pm    Post subject: Re: And this casting is what? Reply with quote

What I found interesting was there is no PCV in that casting on my MPV and the hose goes toward the centre and up into the intake plenum. I can not see that area very well and just reinstalled it as it came out.
The two manuals I have for this thing (one Factory and the other a Haines) both show other positions for the PCV. So I can only scratch my head.

If anyone has such a casting can you tell me where your PCV is located. Will replace it if I could find it. LOL
Back to top
View user's profile Send private message
poptop
MPVClub Resident
MPVClub Resident


Joined: 27 May 2005
Posts: 667

PostPosted: Thu Dec 29, 2022 8:14 pm    Post subject: Re: And this casting is what? Reply with quote

Its been many years since I changed mine, but I think If you follow the rubber hose coming out of the casing to where it does a 90 degree turn up into the bottom of the throttle body, the PCV is between the 90 degree and the throttle body.
1990 4X4 V-6 5-speed
1991 2WD V-6
1994 2WD V-6
Scion Xb
A pile of old timing belts
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    MPVClub.com Forum Index -> 89-98 MPV All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group