MPVClub.com home Log in to check your private messages Support MPVClub.com!


mazda passide cv
Post new topic   Reply to topic    MPVClub.com Forum Index -> 00-06 MPV
View previous topic :: View next topic  
Author Message
petertohen
Newbie
Newbie


Joined: 13 Jan 2018
Posts: 1

PostPosted: Sat Jan 13, 2018 12:34 am    Post subject: mazda passide cv Reply with quote

I bought I new Cv axle installed it and it went bad well I found out my motor mount where bad front left/rear/ and go ahead replace the front. The one on the passide is ok there on there way from rock auto. So right now I have alittle vibration from bad mount and cv axle. The dumb part is the locking C clip that is on the shaft on the transmission wasn't in good shape when I installed the axle but I could not find on only dealer and the New cv axle not reman didn't come with one. I still was able install the cv axle and it locked. Now I' am replacing all engine mounts which can cause a cv axle to go bad. I was wondering I have a ford dealer really close to me I know mazda and ford somethings . I seen the same passside cv axle fits a 97 ford probe 2.5 so I wonder if ford wold have or get it?
http://www.mazda.com/en/innovation/technology/safety/
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    MPVClub.com Forum Index -> 00-06 MPV All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group